Roll Former Corporation

 Since 1978   
Rollformer Corporation - Made in USA - Since 1978 Made in USA

Now 42 Years
of Excellence

 

Roll Former Corporation

Roll Former Corporation
140 Independence Lane
Chalfont, PA  18914   USA

P: (215) 997-2511
F: (215) 997-5544

Thank you for your interest in the Roll Former Corporation line of quality equipment.

Please find information on our SLP - 175 Machine to produce one of the most popular commercial metal roof panels in the industry, the 1 3/4" Snap Lock Panel.

The SLP - 175 Machine is an adjustable width machine for 12" to 20" panels with a 6" "material use". Complete with electric - hydraulic drive and front hydraulic scissors shear and a single batch GEM Digital Controller for fully automatic operation. The machine is powered with a 5 HP 220 Volt 1 or 3 Phase power unit for 22 - 24 gauge Painted Steel -.032" Painted Aluminum capacity.

The price for the SLP - 175 is $54,300.

Additional Options:

3000 Lbs. capacity Decoiler (Non-Powered)

$  1,800

Machine Stand with Leveler Pads (shop use) $  1,000

Stiffening Ribs - Two (2) in either V, Flat, or Pencil Rib design

$  2,200
Bolt - On Striation Rib Attachment           $  3,500
Hot Melt Butyl Caulk System 220 Volt 1 Phase $  12,500

 

 

 

Lead-time varies but is generally 20 weeks upon PO and receipt of a 30% Deposit, balance due Prepaid.

 

FOB - Chalfont, PA

Crating Charges - $300

 

All Roll Former Corporation Machines are made in the USA!

Sincerely,
John

John R. Dumke
Vice President / Director, Sales & Mkt.
Phone: 215-997-2511
jdumke@rollformercorp.com


.

find us on facebook

Copyright © 1997-2005 Roll Former Corporation -- All Rights Reserved

Search Engine Optimization by Dynamic Digital Avertising