Roll Former Corporation

 Since 1978   
Rollformer Corporation - Made in USA - Since 1978 Made in USA

Now 40 Years
of Excellence


Roll Former Corporation

Roll Former Corporation
140 Independence Lane
Chalfont, PA  18914   USA

P: (215) 997-2511
F: (215) 997-5544

Thank you for your interest in the Roll Former Corporation line of quality equipment.

Please find our standard PCM–Panel Curver Machine information to follow. The price for the PCM machine is $12,800 with electric-gearbox drive, 110 volt, 1 phase. It is designed to curve straight vertical leg “U-panels” up to a 7/8” high leg, convex or concave. It has adjustable panel width capability 10” to 24”. It also curves our SS10 – 1” Snap Cap convex or concave.

The SS10-1” Snap Cap Machine will form a 2-9/16” coil stock into the 1” snap on cap, 110 volt 1 phase electric – hydraulic power and rear manual profile shear. The price of the base model SS10 is $14,500. Options for the cap machine include hydraulic power for the rear shear, Digital Controller and 3,000 lbs. Decoiler. Add these options and have a completely automatic machine for your production and supply needs.

  Panel Curver Machine $12,800
  Machine Stand w/leveler pads $350
  SS10 Cap Machine $14,500
  Hydraulic Powered Shear $1,300
  Digital Controller $4,200
  Machine Stand with Levelers $600
  3,000 Lbs. x 30” Decoiler $1,600

Lead-time is generally 4 - 6 weeks upon receipt of PO and a 30% deposit, balance due Prepaid.


FOB - Chalfont, PA

Crating Charges - $150 each machine



John R. Dumke
Vice President / Director, Sales & Mkt.
Phone: 215-997-2511

find us on facebook

Copyright © 1997-2005 Roll Former Corporation -- All Rights Reserved

Search Engine Optimization by Dynamic Digital Avertising