|
Gutter Trim Recoilers
| GUTTER TRIM 16/15—RECOILER |
$5,000.00 |
| Includes Lynx DC Controller and manual scissors shear |
| 16” coil ID max, 15” coil width
max |
| 300 lbs. max. recoiler capacity |
| variable speed up to 200 FPM |
| |
| OPTIONS: |
|
| 400 lbs. Uncoiler to hold master coil |
$500.00 |
| “V” Castors |
$325.00 |
| Regular Castors |
$300.00 |
| COIL PROCESSOR 16/24 - RECOILER/SLITTER/BLANKER |
$24,600.00 |
Includes hydraulic drive and manual scissors shear,
GEM Digital Controller
|
| 16” coil ID
maximum |
| 24” maximum coil width |
| 3000 lbs. max recoiler capacity |
| one (1) slitting knife with capacity of 24 ga. Steel, .032 aluminum |
| 50 FPM speed. |
| |
| OPTIONS: |
|
| 2nd Slitting Knife |
$1,200.00 |
| 12’ Slope Table for Blanking Capability |
$1,200.00 |
Perforation Die Stage—2 sets of Perf Dies with 4 rows
(For Blanking Sheets Only)
|
$3,500.00 |
| 3,000 lbs. x 30” Decoiler for master coil |
$1,400.00 |
• Click Here for Owners Manual
[Home]
[Residential][Power
Seamers] [Commercial/Industrial]
[Post & Frame/ Metal Bldg] [Request
Info] [Contact Us]
Copyright © 1997-2005
Roll Former Corporation
-- All Rights Reserved
Search
Engine Optimization
by Dynamic Digital Avertising |
Made in USA
