Thank you for your interest in the Roll Former Corporation line of quality equipment!
The Ag Panel or R-Panel Machine produces one of two of the most popular Metal Roofing / Metal Building profiles used today. A very strong panel used as a Roof Panel and or Wall Panel. The machine will accept approximately a 42" wide coil stock (26-29 ga. Steel), giving you a 38" wide panel and 36" coverage with the panel overlap. The 3/4" Ag Panels are typically 9" o.c. with 5 major ribs within the panel - minor ribs in between. The 1 Ό R-Panels are typically 12 o.c. with 4 major ribs minor ribs in between. The machines are 18 - 22 stages long with 416 grade stainless steel forming rolls, 303 grade 1 ½ / 2 diameter stainless steel shafts, electric-hydraulic power - 220 volt 3 phase with hydraulic powered rear profile shear. Digital Controller for fully automatic operation at 80 100 FPM speed. Machine Stand included. A 48 x 5000 lbs. Decoiler (non-powered) is sold separately - $2,000.
This machine is priced at $89,400 with a quoted delivery time of approximately 22 weeks upon receipt of a 33% Deposit and PO / Balance due Prepaid or COD. FOB Chalfont, PA.
*** Please note that additional equipment may be required for this type of panel production.
Power Decoiler Equipment with Coil Weights of over 5000 Lbs.
Press Room Equipment, 1-417-864-3636 or
www.pressroomequipment.com
Automatic Stacking Equipment for 38 wide panels / heavy weights.
TEKFAB Inc., David Hendry, 1-541-704-2370 or www.tekfabinc.com
Thank you.
Sincerely,
John
John R. Dumke
Director, Sales Marketing
215-997-2511 Ext. 13
Jdumke@rollformercorp.com
If you have questions on any of our equipment please do not hesitate to call. Thank you again. |
Made in USA
