 |
|
|
|
Made in USA|
News & Updates
"One of the Most Versatile Panels Available is now Affordable" The “Ag Panel” or “R-Panel Machine produces one of two of the most popular Metal Roofing / Metal Building profiles used today. A very strong panel used as a Roof Panel and or Wall Panel. The machine will accept approximately a 42" wide coil stock (26-29 ga. Steel), giving you a 38" wide panel and 36" coverage with the panel overlap. The 3/4" Ag Panels are typically 9" o.c. with 5 major ribs within the panel - minor ribs in between. The 1 ¼” R-Panels are typically 12” o.c. with 4 major ribs – minor ribs in between. The machines are 18 - 22 stages long with 416 grade stainless steel forming rolls, 303 grade 1 ½” / 2” diameter stainless steel shafts, electric-hydraulic power - 220 volt 3 phase with hydraulic powered rear profile shear. Digital Controller for fully automatic operation at 80 – 100 FPM speed.
Designed for 1" - 1.5" High Architectural Standing Seam Roof Panel - 22 ga Steel/.040" Aluminum Since 1978 Roll Former seamers have a history of quality and durability. Our seamers produce perfect seams on all materials from Copper to Kynar finished Galvanize/Galvalume Steel at 30 fpm - without damage to the material. They can also seam NTM, Knudson, ESE and Schlebach profiles. The Model SSX Heavy Duty will form a complete double lock standing seam with a single pass. Our exclusive nose switch cuts the unit off if it comes to the edge of the roof, eliminating expensive and time consuming accidents.
Roll Former Corporation has introduced a new line of Recoilers and Slitter Recoilers. Both models feature digital controllers and shears. The Slitting models handle up to 24-gauge steel and .032 aluminum. The model RTR16-15 is specifically designed for the recoiling of gutter material. The model Coil Processor 16-24 is designed to recoil, slit, and blank (cut-to-length) up to 24" wide material with a maximum of 2 slitters, perforation die available. "Stand Alone" Perforation Machine Save time and money using our new product!! This sheet fed unit will perforate up to 24"
wide material. Complete with (2) adjustable perforation dies, this
unit is ideal Contact us today!!
Check out our new
SS Industrial Seamer to seam your
Designed
for 2" high "Armco Style"
|
||||||||||||||||||||
NEW
PRODUCTS
Easier
material handling
